E-PSMP-01 Patient Parameter Monitor Module For GE B450 B650 B850
Repair Parts
Multi-parameter hemodynamics module
The multi-parameter module is capable of monitoring multiple
parameters simultaneously, such as electrocardiogram, spO2 and NBP.
Only one of these modules can be used simultaneously. The four main
multiparameter hemodynamics modules include PRESTN, PSM, PDM and
TRAM.
Other modules
There are many other parameter acquisition modules that interface
to the nursing monitor B850.
E- modules: plug into the framework and provide extensive parameter
acquisition capabilities.
Tram-Rac module: insert Tram-Rac, parameter capacity is limited.
Most of them are single parameter
| Item name | GE B450 B650 patient monitor E-PSMP-01 module |
| Brand | GE |
| Model | E-PSMP-01 |
| Use place | Hospital Devices; Medical Care; ICU; |
| Deliver time | 3-5 days |
| Warranty | 90 days |
Multi-parameter hemodynamics module
E-modules
Tram-Rac module
PDM (patient information module)
The PDM processes patient data signals and sends them to monitors
for display. Stores patient data for 24 hours with 1 minute
resolution.
1. ECG / Imp. Respiration time
- T1-T2/CO
- P1-P4
- Remove the option card of the module
- Spo2
- NIBP
- Defib/Sync
- Dual function power on and zero all buttons
- Power indicator
- Communication indicator
PDM support:
- 3, 5, 6 or 10 lead ECG cable.
- SpO2-nerve cells or Masima
- NBP-Data Super Statistical Technology
- Two templates
- Cardiac output
- Up to 4 invasive pressures
- Respiratory function-I, II and abdominal RL-LL
- EK-Pro arrhythmia detection algorithm in arrhythmia treatment
1.NIBP
2.P1-P2
3.ECG /Imp. respiration
4. SpO2
5. 5.T1-T2
PSM also has a variant called PSMP, which supports invasive blood
pressure measurement. There are direct action buttons on the module
to start or stop blood pressure, start or stop automatic NIBP
circulation and zero invasive pressure
PSMP support:
- 3, 5, 6 or 10 lead ECG cable
- SPO2-Ohmeda
- NIBP,
- two invasive blood pressure (with PSMP),
- EK-Pro arrhythmia detection algorithm-processing is done in the
processing unit
Installing and removing modules
Install and remove the B850 module
warning
When connecting to PDM or TRAM, the loaded IP label may affect the
channel label of other connected channels, which will also affect
the alarm limit.
Install and remove the PSM to the frame
To install the PSM to the frame
1. Connect a module by aligning a module with the insertion guide
on the outside of the frame.
2. Push the module into the frame until it clicks and stops
Remove PSM from the frame:
1. Pull down the release tab to retract the lock key and release
the PSM from the frame.
2. Hold the PSM firmly and slide it off the frame guide
Other modules
PICCO module ,MPM moduel ,AG module ,M3001A module ,M3012A module
,M3014A module ,M3015A module ,M3016A module, E-mini C module ,
M1034B module,T series Co2 side stream module 115-043912-00,CO2
Module ,M1006B module,IBP module ,GE B20i patient monitor parameter
module with IBP SPO2 ECG NIBP 2060241-001-3 etc
If you're interested in E-PSMP-01 Patient Parameter Monitor Module For GE B450 B650 B850
Repair Parts ,feel free to contact us .Thank you .
